Our leaf spring clamps are a perfect choice when renewing or modifying your truck's leaf spring
suspension. When adding or removing a leaf, our spring clamps allow the springs to be clamped
exactly as desired.
Note: If the location on the spring clamp on the leaf spring is not dimpled, simply hammer the
cross-strap notch flat before installing.
Sold in pairs (2) or a set of four (4).
Application: 1-3/4", 2", 2-1/2", & 3" wide leaf springs.
Notched dimple cross-strap.
Easy to install.
Our heavy-duty U.S. MADE leaf spring REBOUND clamps are a perfect choice when renewing or modifying your truck's leaf spring suspension.
When adding or removing a leaf, our spring clamps allow the springs to be clamped exactly as desired.
U.S. Made.
Sold in pairs (2) or a set of four (4).
Application: 2-1/2" and 3" wide leaf springs.
Double drilled holes to fit a 3-1/2" and 4-1/2" spring pack. Need a custom size? Contact us!
Easy to install.
Note: Use a ball peen hammer to secure the rivet on the outer leaf. And remove excess
material from the clamp if using the lower hole.
Stock & Custom Length Limiting straps for Extreme suspensions. Available in 5 stock lengths, or
custom up to 36".
Re-Sellers Welcome
We are exclusive distributors for many of our listed products. We offer volume discounts, or
drop-ship set-ups to retailers of 4x4 accessories and recovery gear.
Disclaimer. Please read:
The effectiveness of this equipment is directly related to the manner in which it is installed,
used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of
the installer/user, and will not be assumed by OKoffroad.com.