With this kit, we put together every component needed for an onboard air system. We installed it and tested it on our trucks,
and we love it. If you already have one of our air compressors, you can upgrade your system and augment
it with our complete onboard air kit. Or order one of our listed compressors. With a never-ending supply of air onboard, you never have
to look for a re-fill, or worry about running out. Run air tools in the field with this system!
2-1/2 gallon air tank with six 1/4" ports.
23" L x 6" W Dimensions.
7" W incl. integrated mounting bracket.
12-1/2" X 3-1/2" mounting bolt pattern.
OR
5 gallon air tank with four 1/4" ports.
20-1/4" L x 9" W Dimensions.
10-1/4" W incl. integrated mounting bracket.
10" X 5-3/4" mounting bolt pattern.
Air pressure gauge - 160 psi.
20 ft. freeze resistant 12 gauge wire.
Heavy-duty pressure switch (110 psi on / 145 psi off).
5 piece tank port fittings: two 1/4" plugs, one drain cock, one 1/4" compression fitting,
one safety valve (175 psi).
Air source relocation kit:
one 1/4" quick connect coupler, one 1/4" quick connect stud, two 1/4" compression fittings, 15 ft. of 1/4" air line tubing,
three air line clips, a 4" continuous grommet strip.
U.S. SHIPMENTS - LOWER 48
Customer Service
"I was doing some trail repairs last time we were out, and used my compressor and
onboard air tank to power my 1/2" impact wrench. It worked a treat! Thanks for the advise."
Steve Johnsen San Diego,
California
OKOR Onboard Air Tank
(click image for large view)
Our 2-1/2 gallon air tank will fit almost anywhere on your vehicle - bolts easily to a spare tire carrier. We've also
seen it mounted under the vehicle between the frame rails. If you want to build your onboard system separately, this air tank is a perfect addition.
2-1/2 gallon air tank with six 1/4" ports.
23" L x 6" W Dimensions
7" W incl. integrated mounting bracket
12-1/2" X 3-1/2" mounting bolt pattern
OR
5 gallon air tank with four 1/4" ports.
20-1/4" L x 9" W Dimensions
10-1/4" W incl. integrated mounting bracket
10" X 5-3/4" mounting bolt pattern
The most versatile off-road tool for airing up and down.
Disclaimer. Please read:
The effectiveness of this equipment is directly related to the manner in which it is installed,
used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of
the installer/user, and will not be assumed by OKoffroad.com.