Recovery Gear at OKoffroad.com

XD Bumper Shackle Mounts & D-Shackles


(click image for large view)

Our Xtreme-duty bumper shackle mounts fit every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers. Without question, the strongest bolt-on recovery point you can buy. The recommended solution for vehicles without bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are not recovery points).
Grade 8 mounting hardware included.

Sold in pairs or singles.
Semi-gloss finish.
3 Ton working load.
Use on front or rear bumpers.
3" X 2" bolt pattern.
4" X 3" outer dimensions.
Includes Grade 8 hardware.
3/4" powder-coated D-shackles.

Note: Use only on a well-made steel bumper. For bumpers thinner than 3/16" steel, we recommend using a backing plate slightly larger than the dimensions of the shackle mount behind the off-road bumper when bolting on the shackle mount. See our backing plates below.
U.S. SHIPMENTS - LOWER 48
Pair


Single




XD Bumper Shackle Mounts w/ Plates & D-Shackles


(click image for large view)

Our Xtreme-duty bumper shackle mounts fit every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers. Without question, the strongest bolt-on recovery point you can buy.

And for bumpers thinner than 3/16" steel, we recommend using our backing plate, which is 1/4" larger than the dimensions of the shackle mount. The plate has the same bolt pattern, and mounts behind the off-road bumper when bolting on the shackle mount. The recommended solution for vehicles without bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are not recovery points).
Grade 8 mounting hardware included.

Note: Use only on a well-made steel bumper. For bumpers thinner than 3/16" steel, we recommend using a backing plate slightly larger than the dimensions of the shackle mount behind the off-road bumper when bolting on the shackle mount.

Sold in pairs or singles.
Semi-gloss finish.
3 Ton working load.
Use on front or rear bumpers.
3" X 2" bolt pattern.
4" X 3" outer dimensions.
Includes Grade 8 hardware.
3/4" powder-coated D-shackles.

Backing Plates.
Ready-to-be-painted finish.
1/4" thick steel.
Use on front or rear bumpers.
3" X 2" bolt pattern.
1/4" wider than shackle mount.
U.S. SHIPMENTS - LOWER 48
Pair


Single





2" Shackle Bracket
Our heat treated T6061 billet aluminum bracket includes 5/8" or 3/4" D-ring, and will fit any 2" receiver.


Steel Receiver Bracket
Heavy-duty cast steel bracket with 3/4" D-ring, and will fit any 2" receiver. Zinc-plated or Black powdercoated finish.


Re-Sellers Welcome
We are exclusive distributors for many of our listed products. We offer volume discounts, or drop-ship set-ups to retailers of 4x4 accessories and recovery gear.


Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by OKoffroad.com.