Suspension Gear at OKoffroad.com

Toyota Leaf Spring Hangers


(click images for large view)

Weld-on brackets to replace cracked or bent factory hangers. Note: They are 1/4" taller than the factory bracket. Will accept the factory pin kit. They can also be used to make a cross member for a straight axle conversion using the factory straight axle springs. Can also be used on a cross member to convert from 2wd to 4wd. Replaces the factory spring bracket 48414-35040 which is no longer available.

Laser cut 1/4" A36 plate steel.
For 2-1/2" leaf spring applications.
Weld-on application.
1/4" steel.
Sold in pairs.
U.S. made.
U.S. SHIPMENTS - LOWER 48
$79.95




(click image for large view)


Leaf Spring Clamps

For renewing or modifying a leaf spring suspension, our spring clamps are the perfect choice.

HD Rebound Clamps

Our heavy-duty U.S. MADE leaf spring REBOUND clamps are a perfect choice for a large spring pack.


Customer Service

"Attached are a couple pictures of the current state of the truck I am building. It is (was) a ’62 Scout, with a Dana 44 in front, and GM 12 Bolt in rear (Lockers in both) sitting on 37” SSR’s. The Chevy 355 we built is just waiting on the SM420 and Dana 20 T-case (with overdrive) to be rebuilt before they can all go in together….Then the body, roll cage, electrical, and interior, etc. I did the “forklift test” before I pulled the body, and I got each tire about 4’ off the ground with swapped full size Chevy leafs and custom built shackles and mounts. I had every intention of a quick rebuild/modify for something I could go crash and roll over, but everything is being done with too much detail now, so it may be a bit before you see action photos of this."

Brian Hamilton
Reno, Nevada


Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used (for off-road use only), and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by OKoffroad.com.

CUSTOMERS' VEHICLES
. .

(click images for large view)